5 Ways To Save Money On Your Future Plumbing And Water Bills

Have a high water bill recently? Looking for a way to reduce your water expenses? Join us as we give you 5 ways to save money on your water bill.

1. Be Wary Of Your Toilets

Is your toilet flushing as it should be? After flushing, make sure the flush button or lever is up. If it doesn’t, and your toilet bowl is constantly filling with water, your toilet may be leaking a little quantity of water into the bowl without your knowledge, increasing your water bill. A water leak might also be caused by worn-out or broken elements on your toilet, such as pipes and fittings.

2. Check For Leaks

Over time, even the tiniest drop or stream of water may waste a lot of energy and water. That’s why you should look for slow drips and/or leaks in all of your home’s faucets, toilets, and shower fixtures. Make careful to check under the sinks in both the bathroom and the kitchen. Fixtures that leak can waste hundreds of gallons of water every day.

If you’ve discovered a leak in your house or noticed a significant rise in your water bill, it’s a good idea to schedule a home inspection with a professional plumber to properly find and repair any hidden leaks. Contact Plumbers Biloxi experts to provide professional advice and address the situation before it becomes a problem.

3. Maintain A Clean Drain

You cause a clog by allowing food debris, hair, and other stuff to travel down your drains. Clogs result in backups, which can lead to pipe breaks. To avoid blockages and subsequent damage that will cost you a lot of money in repairs, but as little food or grease down your drain as possible. Check your drains regularly for any problems.

4. Regular Maintenance

The best way to save future plumbing expenses is through awareness and maintenance. Once a month, make sure that your pipelines, water meters, and other equipment are in good condition. If you detect an issue no matter how small, address it as soon as possible. When neglected, these small issues will become major issues that are harder and more costly to solve.

A certified, professional plumber can examine your whole home’s plumbing and water use to see if any renovations, repairs, or enhancements might save you money.

5. Use Showerheads With Lower GPM

Every day, you use your shower head, but have you ever considered how much water goes through it? According to some basic calculations, an average person takes a 15-minute shower every day using a 2.5 GPM showerhead, they will use around 13,688 gallons of water each year. However, installing a 2.0 GPM showerhead will save you many thousand gallons of water each year.

Multiply that by the number of heads in your home plus taking long showers, you could spend a lot of money on your water bills. Use a lower GPM showerhead if you want to save.

Save Water And Save Money!

While saving water, you not only save money but also help the environment by reducing the amount of water consumed! Save water, save the environment, and save money with the help of your plumbers. Contact your local plumber and start today!

How To Prepare Your Home For Summer And Spring!

The cold season is over and it’s not the only thing you should be preparing for every year. The spring is coming and summer after. You’re gonna need to prepare your house for these 2 seasons. This article will guide you by providing useful tips to make your home comfortable during the upcoming summer and spring!

Pointer In Preparing Your Home For Spring And Summer

Check Your Water Supply

With the heat coming in a flash, you must be prepared in case your area suffers from a drought. Even if it isn’t a common occurrence in your area, you should always be prepared for it. Furthermore, it’s not just a lack of water flow in the pipes that causes dehydration, so make sure you have enough to stay hydrated.

Cleaning The Drainage System

There must be some twigs and dust in your gutters from the previous season. From ice particles to dried-up plant remains. Do not let it clog your drainage system and cause excess water to leak, which will now cause molds if not addressed immediately.

Check Any Concrete Areas For Molds

Concerning the drainage system, it’s best if you can find any holes in the walls, ceiling, and even the floor assuming it’s made of concrete. Stepping on mold-infested slippery areas is not only dangerous to your health but also puts you at risk of an accident.

If you notice any cracks or holes, contact an inspector to see if any gas or water pipes are damaged. If not, hire a mason to professionally repair the damaged area.

Be Wary of Possible Fire Accidents

Houses are more likely to catch fire during the hot season. A short circuit, a candle left near a flammable item, or even a broken gas pipe can all cause this. It was previously mentioned that you should also inspect your gas pipes. A gas leak can result in anything from a minor burn to a massive explosion.

Fire is not something to be taken lightly, as it has claimed more lives than you can imagine. It is not only dangerous to you but also to your neighbors and even bystanders. Check your smoke detectors and keep emergency water or a fire extinguisher on hand to prevent fires from spreading if such an accident occurs.

Clean your air vents

Everyone from your kitchen vents to your air conditioner must be checked and maintained properly to avoid poor airflow throughout the room or the entire house. The air conditioners are also at risk of causing damage to the device’s evaporator coil.

Summarizing

All of the items on this list are basic but crucial. People frequently overlook this type of planning. As a result, the risks have increased and are sometimes unavoidable. It is important to prepare your home for these seasons. For expert advice, contact Masonry Baltimore or the professionals in your area.